1.Pierce through wire without breaking the insulator.
2.Self centering piercing needle for perfect pierce through in order to establish metal contact even with small diameter wires.
3.Quick and Easy reach for obstructed areas where the wires & circuits located.
4.Provision for tools manufacturer to build their own testing circuits inside the device.
It is used in auto electrical
diagnosis for piercing wire to
check continuity, measure voltage, resistance (Ohms), etc. in conjunction with
multi meter, etcwithout causing severe damage to the wire insulation itself.
The extraordinary hook PierZ design which can holds the
small wire of 0.5mm up to diameter of 45.0mm at sufficient retention and locked on
steadily, ensuring the wire is centered and doesn't slip during pierce through.
With the 195.0mm long half
end "PierZ" it allows easy contact into a hard to reach test point.
Supply with 2 lengths of
cable leads with 4.0mm banana on each end. The red cable lead connects to a multi
meter while the black cable lead and crocodile clip connects to the vehicle
body or chassis ground.
Pierz comes with LED
light (battery used: 3V CR1220) to provide illumination in dark work
Tools Manufacturer can build their own testing device to
couple with PierZ.