Just clamp to the battery terminals [Red to positive
terminal] and [Black to the negative terminal] and it starts to operate.
1. Battery Condition Monitoring - display battery voltage with LEDs indication
Green- battery condition is good
Red and beeper sounds - indicates battery condition is weak,
battery needs recharge.
2. Starter (Cranking condition)
Monitoring - capture the cranking voltage and
display voltage drop with LEDs indication
Green- voltage drop within limits and battery condition is
Yellow- voltage drop is in warning status and needs attention
Red and beeper sounds- cranking voltage beyond voltage
limits and needs attention
3. Alternator (Charging Condition)
Monitoring - display charging voltage with LEDs
Green- charging voltage is within the acceptable range and
alternator is in good working condition
Yellow- charging voltage is higher than normal range (12V
system: from 14.50V to 14.99V; 24V system: from
28.99V to 29.99V). Checking regulator assembly required.
Red and beeper sounds- charging voltage is beyond the
charging voltage range limit. Checking Alternator required.